Western Digital OpenFlex F3100 User Manual page 131

3. Management
User Guide
3.2 Part Replacement
Figure 175: Secure BMC Module
d. Verify that the BMC module is securely latched into the chassis by pulling on the latch
and ensuring the BMC module does not move when pulled. Reinstall the BMC module if
it is not securely installed into the chassis.
Step 11 : Install the OpenFlex F3100 s into the enclosure.
a. Determine and record what slots are physically populated with an OpenFlex F3100 .
The slots are assigned letters A through J, from left to right, when facing the front of the
enclosure. These slot assignments coincide with the QSFP28 ports on the rear of the
enclosure. This information will be utilized during the connection of the QSFP28 ports.
125