User Guide
Figure 55: Chassis Slots Information
The Slots panel gives information on the devices that are installed in each slot.
3.1.5 Basic Operational Functions
For the OpenFlex F3100 and E3000 , the basic operational functions are the tasks needed to begin the
initial operation of the system, e.g. check system health, create a user account, etc.
3.1.5.1 Navigating to a Device Using the OCGUI
This task provides instructions for using the OCGUI to navigate to a device's dashboard through any
other fabric-connected device.
The BMC's MAC address is listed on a label affixed to the module's side. This MAC address can be used
to determine the IP addresses assigned via DHCP to the OpenFlex™ E3000 chassis and the F3100 storage
devices contained within it.
3. Management
3.1 OCGUI
49