Western Digital OpenFlex F3100 User Manual page 98

User Guide
Table 33: Replacement Procedure Info
Required Tools
None
Step 1 : Unpack and inspect the new OpenFlex F3100 for damage.
a. Inspect the packaging that the OpenFlex F3100 replacement was shipped in and
record any damage to the box. Large cuts, open boxes, and crushed corners should be
reported.
b. Remove the OpenFlex F3100 from the packaging and verify that there is no damage to
the OpenFlex F3100 . Dents, scratches, and broken parts should be reported. If major
damage has occurred to the OpenFlex F3100 , DO NOT use the replacement part.
c. Store in a safe location until the OpenFlex F3100 is needed for installation.
Step 2 : Uninstall the OpenFlex F3100 from the enclosure.
a. From the front of the rack, press the release button on the front of the OpenFlex F3100 .
The release handle will eject outward.
b. Use the release handle to pull the OpenFlex F3100 out of the enclosure part way.
Then grasp the OpenFlex F3100 from the underside to support it as you pull it
the rest of the way out of the enclosure. See the hand placement in the image.
# of People Required
Figure 111: OpenFlex F3100 Release Operation
1
3. Management
3.2 Part Replacement
Time Required
2 minutes
.
92