Western Digital OpenFlex F3100 User Manual page 76

User Guide
Step 6 : Click the checkbox next to Please Confirm, and then click the Create button:
The newly created host will appear in the list on the device's Hosts page.
3.1.5.8 Configuring a Path Using the OCGUI
This task provides instructions for configuring a Path between a Host and Volume using the OCGUI.
Note: A Path is a dedicated line of communications between a Host and a Volume, which
cannot be established until both the Host and Volume have been created.
Note: The following instructions define how to create a Path to a Host through the device's
Volumes page. That same path may also be created from the other direction—to a Volume
through the device's Hosts page.
Step 1 : Navigate to the device's dashboard (see
49)).
Step 2 : Click the Volumes icon:
Navigating to a Device Using the OCGUI (page
3. Management
3.1 OCGUI
70