Western Digital OpenFlex F3100 User Manual page 126

User Guide
b. Lower the release handle until the BMC module is fully unseated (this occurs at about
60°) and pull the BMC module out of the chassis ensuring that you support the under
side of the BMC module with your other hand.
Step 8 : Uninstall the Chassis from the rack.
a. Uninstall the rack ear covers from both of the chassis mounts.
Figure 165: BMC Module Release Handle Operation
Figure 166: Uninstall BMC Module
Tip: A T15 Torx screwdriver is required for this step.
3. Management
3.2 Part Replacement
120