Western Digital OpenFlex F3100 User Manual page 61

User Guide
Step 17 : After clicking sensors, the status of sensor will appear at the bottom of the GUI. Review the
health information related to each of the sensors. Each of the sensors reports a current reading
related to temperature, volts, or amps.
Step 18 : Click the Slots icon:
Step 19 : After clicking slots, the health status of the slot the will appear above the top right corner of
the device table.
3.1.5.3 Establishing a Location Using the OCGUI
Step 1 : Enter a valid username and password, and click the Login button:
The system dashboard appears:
Note: The default username/password is / .
admin admin
3. Management
3.1 OCGUI
55