Cables; Restrictions And Limitations - Western Digital OpenFlex F3100 User Manual

Hide thumbs Also See for OpenFlex F3100:
Table of Contents

Advertisement

User Guide
1.4.2   Cables
The following table displays the power cable supported by Western Digital:
Table 16: Approved Power Cables
IEC C14 to IEC C15 Heavy
Duty 15A Power Cable
The following table displays the Ethernet cables approved by Western Digital:
Note: These cables are approved, but not provided by Western Digital.
Table 17: Approved Ethernet Cables
Vendor
Mellanox
Amphenol
1.5   Restrictions and Limitations
The OpenFlex F3100 and E3000 have the following restrictions and limitations on functionality:
• All E3000 chassis must be full for proper airflow. This means that if there is only one device installed, the
rest of the device slots must be filled with device blanks.
• If the BMC Module is not installed in the E3000 chassis, F3100 devices cannot be added or slot
swapped.
• Only hot-swap a single component at a time. Never remove more than one at a time.
• VLAN tagging is not supported.
• RoCE v1 is not supported. F3100 will support RoCE v2 only.
Type
(Provided in Accessory Kit)
Active/Passive
Passive
Passive
Passive
Active
Passive
Passive
Passive
Passive

1.5 Restrictions and Limitations

Part Number
Vendor Model Number
MCP1600-C001
MCP1600-C002
MCP1600-C003
MFA1A00-C005
NDARHG-0001
NDARHG-0004
NDARHF0002
NDARHJ0003
1. Overview
Length
6 ft.
Western Digital
Part Number
16

Advertisement

Table of Contents
loading

This manual is also suitable for:

Openflex e3000

Table of Contents