Western Digital OpenFlex F3100 User Manual page 107

User Guide
Step 6 : Uninstall the Rack Mount Rails.
a. Move to the rear of the rack and using the T15 Torx screwdriver, remove the two T15
screws that secure the rail to the vertical rack rails. Repeat this step to remove the two
T15 screws that secure the remaining rail to the vertical rack rail.
b. Move to the front of the rack and using the T15 Torx screwdriver, remove the T15 screw
that secure the rail to the vertical rack rails. Repeat this step to remove the remaining T15
screw that secure the remaining rail to the vertical rack rail.
Figure 128: Uninstall Chassis
Tip: A T15 Torx screwdriver with torque measuring capabilities is recommended
for this step.
Figure 129: Rear Rack Mount Rail Screw Removal
3. Management
3.2 Part Replacement
101