Western Digital OpenFlex F3100 User Manual page 128

User Guide
Step 9 : Install the new Chassis into the rack.
a. Carefully slide the chassis onto the rails until the chassis mounts are flush with the
mounts on the rails.
b. Use a T15 Torx screwdriver to install the three M5 screws that secure the chassis rack
ears to the vertical rack rail. Do this to both rack ears to fully secure the enclosure.
Figure 169: Uninstall Chassis
Tip: A T15 Torx screwdriver is required for this step.
Figure 170: Chassis Installation
3. Management
3.2 Part Replacement
122