Western Digital OpenFlex F3100 User Manual page 111

User Guide
b. Use a T15 Torx screwdriver to install the three M5 screws that secure the chassis rack
ears to the vertical rack rail. Do this to both rack ears to fully secure the enclosure.
c. Verify that the Chassis is secured to the rails and does not move when pulled. Remove
the screws and try again if the enclosure is not secured to the rack.
d. Install the rack ear covers onto both of the chassis mounts.
Figure 136: Chassis Installation
Figure 137: Chassis Screw Installation
3. Management
3.2 Part Replacement
105