Table of Contents
Advertisement
User Guide
Step 9 : Review the listed paths to identify the one referencing the previously selected volume and
host(s); the names and NQNs will be listed under the Volume NQN and Host NQN columns.
3.1.6 Power Cycling
For the OpenFlex F3100 and E3000 , power cycling is accomplished by powering-off an individual storage
device from its Administration page in the OCGUI. Once powered-off, the storage device is no longer
responsive, and must be powered-on from the Slots page of the chassis that encloses the storage device.
3.1.6.1 Power Cycling a Storage Device Using the OCGUI
This task provides instructions for power cycling a storage device using the OCGUI.
Step 1 : Navigate to the device's dashboard.
Step 2 : Click the Administration icon:
The device's administration information appears:
Step 3 : Click the Reboot button:
Step 4 : Click Reboot:
3. Management
3.1 OCGUI
74
Advertisement
Table of Contents
