User Guide
c. Lift the release handle up and press it into the BMC module to secure it into the slot.
d. Verify that the BMC module is securely latched into the chassis by pulling on the latch
3.2.4 OpenFlex F3100 Replacement
Note: Both PSUs and the BMC Module must be operational before replacing an OpenFlex
F3100 device.
Figure 109: BMC Module Installation
Figure 110: Secure BMC Module
and ensuring the BMC module does not move when pulled. Reinstall the BMC module if
it is not securely installed into the chassis.
3. Management
3.2 Part Replacement
91