Western Digital OpenFlex F3100 User Manual page 138

User Guide
a. Unlock the Fan Module by turning the thumbscrew counterclockwise until the screw
threads are not engaged any longer. The location of the thumbscrew is shown in the
following image.
b. Gently slide the Fan Module into the fan bay until the release handle is engaged with
the chassis. When the handle lifts up slightly, it is an indicator that the release handle is
engaged with the chassis.
c. Press the release handle into the Fan Module and secure it in place by turning the
thumbscrew clockwise until it is tight.
Figure 187: Prepare Fan Module
Figure 188: Fan Module Engaged
3. Management
3.2 Part Replacement
132