Getting To Know The Service Manual; How To Use The Service Manual; Contents Of Manual - Fuji Xerox DocuPrint M355df Service Manual

Introduction

1. Getting to Know the Service Manual

1. Getting to Know the Service Manual
This manual is used as the standard service manual for the DocuPrint M355df.
• Publication Comment Sheet
Enter any comments and/or corrections regarding the DocuPrint M355df service manual into the
Publication Comment Sheet, and send it to FX/TS PSC OSG via OpCo Technical Service
Department
2.

How to Use the Service Manual

This manual describes the standard procedures for the servicing of the product. Refer to Chapter 1
Service Call Procedure for efficient and effective servicing during maintenance calls.
2.1

Contents of Manual

• Hardware
This manual summarizes all technical information on the product.
• Chapters
This manual is divided into ten chapters as described below.
Chapter 1 Service Call Procedure
This chapter describes the general work and servicing procedures for the maintenance of the
product.
Chapter 2 Troubleshooting
This chapter describes the troubleshooting procedures other than image quality
troubleshooting of the product. It also describes how to use the diagnostics and some
programs.
Chapter 3 Image Quality Troubleshooting
This chapter describes the image quality troubleshooting procedures of the product.
Chapter 4 Disassembly/Assembly and Adjustment
This chapter describes the disassembly, assembly, adjustment and replacement procedures
for the components of the product.
Chapter 5 Parts List
This chapter contains the spare parts list for the product.
Chapter 6 General
This chapter contains the specification, service modes, and service data of the product.
Chapter 7 Wiring Data
This chapter contains the information about the Wiring Connector List/Locations and the
Wiring Data for the product.
Chapter 8 Accessories (not yet issued)
This chapter contains the information on related products.
Chapter 9 Installation / Removal (not yet issued)
This chapter contains the installation and removal procedures and product-specific options.
Chapter 10 Mechanism & Functions Overview
This chapter gives an overview of the functions of the main components of the product.
Preface-1