Fip2.11 Solenoid Feed Msi (Pl13.1.5) - Fuji Xerox DocuPrint M355df Service Manual

Chapter 2 Troubleshooting
2.3 Error Code FIP
FIP2.11 SOLENOID FEED MSI (PL13.1.5)
Step
Parts considered to be the cause
GEAR SEGMENT MSI 1 (PL13.1.6)
GEAR SEGMENT MSI 2 (PL13.1.7)
SOLENOID FEED MSI (PL13.1.5)
PWBA MCU (PL18.2.2)
Check for foreign substances in the SOLENOID FEED MSI
Drive Section
1
Are there any foreign substances in the SOLENOID FEED
MSI Drive Section?
Check the shape of the GEAR SEGMENT MSI 1 and the
GEAR SEGMENT MSI 2
2
Are the GEAR SEGMENT MSI 1 and the GEAR SEG-
MENT MSI 2 damaged?
Check connector connection
Check the connection between the SOLENOID FEED MSI
3
and the PWBA MCU.
Is the SOLENOID FEED MSI (P/J15) connected securely?
Check after replacing the SOLENOID FEED MSI
4 Replace the SOLENOID FEED MSI.
Does an error occur?
Check and Action
2-84
Yes
Remove the
foreign sub- Go to Step 2.
stances
Replace the
GEAR SEG-
MENT MSI 1
Go to Step 3.
and the GEAR
SEGMENT
MSI 2
Securely con-
nect the SOLE-
Go to Step 4.
NOID FEED
MSI (P/J15)
Replace the
PWBA MCU. End of work.
(REP 18.2)
No