Fip2.4 Msi No Paper Sensor [Hvps] (Pl18.2.5) - Fuji Xerox DocuPrint M355df Service Manual

FIP2.4 MSI No Paper Sensor [HVPS] (PL18.2.5)
Step
Parts considered to be the cause
ACTUATOR NO PAPER MSI (PL13.1.4)
MSI No Paper Sensor [HVPS] (PL18.2.5)
HARNESS ASSY HV (PL18.3.13)
PWBA MCU (PL18.2.2)
Check for foreign substances in the MSI No Paper Sensor
[HVPS] Detector
1
Are there any foreign substances in the MSI No Paper Sen-
sor [HVPS] Detector?
Check the shape of the ACTUATOR NO PAPER MSI
2
Is the ACTUATOR NO PAPER MSI damaged?
Check connector connection
Check the connection between the HVPS and the PWBA
3 MCU.
Is the HARNESS ASSY HV(P/J261-P/J26) connected
securely?
Check after replacing the HARNESS ASSY HV
4 Replace the HARNESS ASSY HV.
Does an error occur?
Check after replacing the HVPS
5 Replace the HVPS. (REP 18.3)
Does an error occur?
Check and Action
2-77
Chapter 2 Troubleshooting
2.3 Error Code FIP
Yes
Remove the
foreign sub- Go to Step 2.
stances
Replace the
ACTUATOR
Go to Step 3.
NO PAPER
MSI
Securely con-
nect the HAR-
Go to Step 4. NESS ASSY
(P/J261-P/J26)
Go to Step 5. End of work.
Replace the
PWBA MCU. End of work.
(REP 18.2)
No
HV