Machine Status; Warm-Up Time; Fpot (First Print Output Time) - Fuji Xerox DocuPrint M355df Service Manual

6.1.13 Machine Status

DocuPrint M355 df (MFP Model)
Developer
Expo-
Status and trans-
sure
Running Working
Ready
Low
Rest
Power
Sleep
*1: Interface Port: USB Port (Type A/Type B), Ethernet Port

6.1.14 Warm-up Time

Event
Power On
Wake up from Low Power Mode
Wake up from Sleep Mode

6.1.15 FPOT (First Print Output Time)

The table below shows FPOT (First Print Output Time). FPOT is defined as the time from when the printer
driver issues a print request in the Standby mode until when the first printed sheet is output completely. Pro-
cess control time is not included.
The job is only set by the previous job and is always kept even after Power-off/on.)
Paper Size
A4SEF
A4SEF
A4SEF
Fusing Cool-
Unit ing fan
fer
Work-
Working Working
Standby
Temp.
Rest
Rest
Status transition
Power off to Ready
Sleep to Ready
Deep sleep to
Ready
Paper Type
Plain
Plain
Plain
Table 6-8
IIT MCU
ing
Work-
ing
Work-
Rest
ing
Rest Rest
Rest
Table 6-9
Warm up time
20 sec or less
16 sec or less
Table 6-10
Paper Tray
MSI
Standard Tray
Optional Tray
6-9
Chapter 6 General
6.1 Specifications
Operation Control-
panel ler
Working
Working
Power
Saver but-
ton and
Ready LED
Only
Condition
20°C/60%RH, Rated voltage.
Power On after seasoning for
3 hours or more.
20°C/60%RH, Rated voltage,
Plain paper job in Sleep
Mode shift and 1 hour.
FPOT
(Ready)
5.5 sec. or less
5.5 sec. or less
6 sec. or less
Inter-
face
*1
Port
Working