Fip1.22 077-312 Tray Configure Error - Fuji Xerox DocuPrint M355df Service Manual

Chapter 2 Troubleshooting
2.3 Error Code FIP
FIP1.22 077-312 Tray Configure Error
Step
Parts considered to be the cause
PWB ASSY OPT TRAY (PL10.1.5)
PWBA MCU (PL18.2.2)
HARNESS ASSY OP FDR (PL18.3.8)
HARNESS ASSY FDR DRAWER 1 (PL10.1.18)
Check the Tray configuration
1
Does the Tray configuration suit the specification?
Check connector connection
Check the connections between the PWB ASSY OPT TRAY
and the PWBA MCU, as well as between the PWB ASSY OPT
2 TRAY and the PWB LVPS.
Are the HARNESS ASSY OP FDR (P/J213-P/J243, P/J24-P/
J243) and the HARNESS ASSY FDR DRAWER 1
(P/J243-P/J419) connected securely?
Check after replacing the HARNESS ASSY OP FDR
3 Replace the HARNESS ASSY OP FDR.
Does an error occur?
Check after replacing the HARNESS ASSY FDR DRAWER 1
4 Replace the HARNESS ASSY FDR DRAWER 1.
Does an error occur?
Check after replacing the PWB ASSY OPT TRAY
5 Replace the PWB ASSY OPT TRAY. (REP 10.3)
Does an error occur?
Check and Action
2-68
Yes No
Change the
Tray configura-
Go to Step 2. tion related to
the specifica-
tion
Securely con-
nect the HAR-
NESS ASSY
OP FDR (P/
J213-P/J243,
P/J24-P/J243)
Go to Step 3.
and the HAR-
NESS ASSY
FDR DRAWER
1
(P/J243-P/
J419)
Go to Step 4. End of work.
Go to Step 5. End of work.
Replace the
PWBA MCU. End of work.
(REP 18.2)