Fuji Xerox DocuPrint M355df Service Manual page 44

Status
LCD Message
Code
Certificate Fail
016-527
016-527
Restart Printer or
Contact Administrator
Certificate Error
016-530 016-530
Restart Printer
Job Ticket Fail
016-570 016-570
Press OK Button
Job Ticket Fail
016-571 016-571
Press OK Button
Job Ticket Fail
016-572 016-572
Press OK Button
Job Ticket Fail
016-573 016-573
Press OK Button
System
016-602 Initialize NVM
Initializing...
016-603 -
016-604 -
016-605 -
016-606 -
Panel Error
016-610 016-610
Restart Printer
Invalid MAC Address
016-612 016-612
Restart Printer
Out of Memory
Job too Large
016-718
016-718
Press OK Button
PDL Error
016-720 016-720
Press OK Button
Name/Description of Error
<LDAP Certificate Error>
SSL authentication internal error.
<LDAP Address Book- Access Error>
LDAP Address Book Other Access Errors.
<Job Ticket Out Of Memory>
XPIF parser detects insufficient memory in the pro-
cessing of XCPT (XPIF) interpretation.
<Job ticket wrong>
Print instruction contents that the device cannot
execute are detected.
<Job ticket media error>
The paper attribute specified by XCPT (XPIF) can-
not solve paper selection.
<Job ticket parse error>
XPIF parser detects error other than those listed
above.
<System NVM Initialize>
At POWON start-up, execute NVM clear.
<ESS-NVM Parameter Recover>
Executed ESS-NVM Parameter Recovery.
<ESS-NVM Parameter Copy>
Executed ESS-NVM Parameter Copy.
<ESS-NVM Parameter Copy>
Executed ESS-NVM Parameter Copy.
<Clear Job History>
Clear Job History.
<Panel Destination Mismatch>
Tried to apply JP setting to non-JP panel, or tried to
apply non-JP setting to JP panel.
<Invalid MAC Address>
MAC address is invalid.
<Memory Over flow>
The current printing job process cannot be contin-
ued because the memory capacity is exceeded.
<PDL Error>
The print data cannot be processed by PDL.
2-11
Chapter 2 Troubleshooting
2.2 Status Code List
Set the LDAP
correctly
Set the LDAP
correctly
Upgrade mem-
ory as required
Press OK But-
ton.
Press OK But-
ton.
Press OK But-
ton.
No action is
required
No action is
required
No action is
required
No action is
required
No action is
required
Only for Pro-
duction Line.
Replace the
PWBA ESS.
(REP18.1)
If the problem
cannot be
solved, replace
the printer.
Upgrade mem-
ory as required
Take correc-
tive actions at
the host side.
FIP