Fip1.24 092-315 Atc Fail - Fuji Xerox DocuPrint M355df Service Manual

Chapter 2 Troubleshooting
2.3 Error Code FIP
FIP1.24 092-315 ATC Fail
Step
Parts considered to be the cause
Drum Cartridge [XERO ASSY] (PL8.1.1)
CONNECTOR ASSY XERO (PL5.1.10)
HARNESS ASSY XERO CRUM (PL18.3.12)
PWBA MCU (PL18.2.2)
Check the installation of the Drum Cartridge
Is the Drum Cartridge installed properly, with no foreign
1 substances at the contact point between the ATC Sensor
in the Drum Cartridge and the CONNECTOR ASSY
XERO?
Check the ATC Sensor part of the Drum Cartridge
2 Is the connection terminal of the ATC Sensor part in the
Drum Cartridge damaged?
Check the CONNECTOR ASSY XERO
3 Is the connection terminal of the CONNECTOR ASSY
XERO damaged?
Check connector connection
Check the connection between the CONNECTOR ASSY
4 XERO and the PWBA MCU.
Is the HARNESS ASSY XERO CRUM (P/J254-P/J25) con-
nected securely?
Check after replacing the Drum Cartridge
5 Replace the Drum Cartridge.
Does an error occur?
Check after replacing the CONNECTOR ASSY XERO
6 Replace the CONNECTOR ASSY XERO.(REP 5.4)
Does an error occur?
Check after replacing the HARNESS ASSY XERO CRUM
7 Replace the HARNESS ASSY XERO CRUM.
Does an error occur?
Check and Action
2-70
Yes No
Reinstall the
Go to Step 2.
Drum Cartridge
Replace the
Drum Car- Go to Step 3.
tridge
Replace the
CONNEC-
TOR ASSY Go to Step 4.
XERO (REP
5.4)
Securely con-
nect the HAR-
Go to Step 5. NESS ASSY
XERO CRUM
(P/J254-P/J25)
Go to Step 6. End of work.
Go to Step 7. End of work.
Replace the
PWBA MCU. End of work.
(REP 18.2)