Terms And Symbols - Fuji Xerox DocuPrint M355df Service Manual

Introduction

3. Terms and Symbols

3. Terms and Symbols
This section describes the terms and symbols used throughout this manual.
The terms and symbols used at the beginning of a text are defined as follows:
Indicates an imminently hazardous situation, such as death or serious injury if
DANGER
operators do not handle the machine correctly by disregarding the statement.
Indicates a potentially hazardous situation, such as death or serious injury if
operators do not handle the machine correctly by disregarding the statement.
Indicates a potentially hazardous situation, such as injury or property damage
if operators do not handle the machine correctly by disregarding the statement.
Used to emphasize the procedure, servicing, and regulation.
NOTE
• REP :
• ADJ :
• PL :
• ASSY :
Safety Critical Components (SCC)
Control of the safety of components that are designated Safety Critical Components shall conform
to Fuji Xerox Co. Ltd-stipulated rules and regulations on Safety Critical Components.
As to replacement of any component designated SCC, the complete component unit must be
replaced. It must never be disassembled or no individual internal parts of it must be replaced.
Installation of any part other than the ones designated by Fuji Xerox Co. Ltd. shall be strictly
prohibited because it cannot be guaranteed in quality and safety.
Important Information Stored Component (ISC)
Important Information Stored Components store customers' important information they have
entered after machine installation. When replacing Important Information Stored Components, you
must replace and discard them, following the procedure described in Chapter 4 Adjustments. Take
care never to let customer information leak out.
Indicates the disassembly/assembly procedure for reference.
Indicates the adjustment procedure for reference.
Indicates the parts list for reference.
Means Assembly.
Preface-3