Resolution; Line Density In Fast Scan Direction; Line Density In Slow Scan Direction; Operation Mode - Fuji Xerox DocuPrint M355df Service Manual

6.1.9 Resolution

6.1.9.1 Line Density in Fast Scan Direction

600 dots/25.4mm
1200 dots/25.4mm

6.1.9.2 Line Density in Slow Scan Direction

600 dots/25.4mm
1200 dots/25.4mm fixed

6.1.10 Operation Mode

6.1.10.1 Power-off Status

The power switch is off and no power is supplied. The machine does not operate.

6.1.10.2 Ready (Standby) Mode

This mode is called as "Energy Saving: Step 1" for BAM(Blue Angel Mark) standard.
When the system starts up by power-on, it shifts from the power-off status to the Standby mode.
At this point, the provided functions (copying, FAX sending, network scanning) become available via the oper-
ator panel. FAX receiving, printing, Direct FAX, and local scanning also become available.

6.1.10.3 Running Mode

There are the Print mode, Scan mode, and FAX communication mode in which the IOT, IIT, and FAX commu-
nication operate respectively.

6.1.10.4 Print Mode

In this mode, the IOT is operating for printing, copying, FAX received printing, and report printing.

6.1.10.5 Scan Mode

In this mode, the IIT is operating for copy scanning, local scanning, network scanning, and FAX scanning.

6.1.10.6 FAX Communication Mode

In this mode, FAX sending/receiving is in progress.
6-7
Chapter 6 General
6.1 Specifications