Fuji Xerox DocuPrint M355df Service Manual page 26

No Servicing Item
3.1 FUSING UNIT
Drum Cartridge
3.2
(XERO ASSY)
4 DADF
Table 1-1
Every Replace-
Time ment Interval
CL O: 100K
C O: 100K*3
O: 35K
CL
Feed*2
1-9
Chapter 1 Service Call Procedure
Removal/Re-
placement
No.
• Check that Heat Roll/Pressure Belt
are not scratched.
Replace where necessary.
NOTE
REP 7.1
To reset the counter, refer to
Chapter 6 (Life), and initialize the
life counter for Fusing PV/Fusing
Heattime.
• Visual check only.
Do not touch the Drum Cartridge
(XERO ASSY) with hand.
Do not use solvents such as Drum
Cleaner. (It will take longer time to
REP 8.1
resume servicing.)
NOTE
*3: To detect the life end of the
Drum,
(Cycle), waste toner estimate, and
PV value count are used.
• Clean any paper dust and contami-
nation in the paper path and on the
jam sensor.
• Check and clean the +Feed Roll/
Nudger Roll and SEPARATION
PAD in the ROLLER ASSY DADF.
Replace the KIT DADF PICK UP
MODULE (ROLLER ASSY
DADF+SEPARATION PAD) if nec-
REP 21.3
essary.
NOTE
*2: Decide whether to reset the
counter based on the counter for
the FUSING
together with the FUSING UNIT)
1.4 TRIM Check List
Service Details
Drum rotation count
UNIT. (Replace