Rep14 Duplex; Rep14.1 Chute Assy-Dup (Pl14.1.12) - Fuji Xerox DocuPrint M355df Service Manual

REP14 Duplex

REP14.1 CHUTE ASSY-DUP (PL14.1.12)
[Removal]
1 Remove the ROLL ASSY-TRANS CRU. (REP6.1)
2 Remove the KIT COVER ASSY REAR AIO. (REP19.7)
3 Remove the one screw (silver, tapping, 8mm) that fixes the SPRING EARTH DTS OUT to KIT
COVER ASSY REAR AIO, and then remove the SPRING EARTH DTS OUT from the KIT
COVER ASSY REAR AIO.
4 Release the two hooks that fix the CHUTE ASSY-DUP to the KIT COVER ASSY REAR AIO, and
then remove the CHUTE ASSY-DUP by sliding it leftward until the four bosses on it are released.
Chapter 4 Disassembly / Assembly and Adjustment
4-68
4.2 Removal / Replacement