Fuji Xerox DocuPrint M355df Service Manual page 49

Chapter 2 Troubleshooting
2.2 Status Code List
Status
LCD Message
Code
MFP Controller Error
017-987 017-987
Press OK Button
Scan Time Out
017-988 017-988
Press OK Button
MFP Controller Error
017-989 017-989
Press OK Button
017-990 -
017-991 -
MCU Firmware Error
024-340
024-340
Code:xxxxxxxx
Restart Printer
Download Mode
024-360 024-360
Send FW Data
IOT Start Error
024-362 024-362
Restart Printer
MCU Comm. Error
024-371 024-371
Restart Printer
Name/Description of Error
<MFP Controller Error>
Cannot read file because it is bigger than read des-
tination buffer.
<Scan Time Out>
Timeout at start of Scan To Application.
<MFP Controller Error>
Stop writing because size of file to be written is big-
ger than read destination buffer (even if file writing
is continued, it is impossible to read the file).
<IIT Auto Registration Adjustment Fail>
Fail to adjust IIT registration automatically at start-
up.
Set to default value and continue processing.
<IIT Level Adjustment Fail>
At the start of IIT read job, fail to adjust IIT level.
Set to default value and continue processing.
<MCU Firmware Error>
MCU firmware error occurs.
<MCU DownLoad Error>
Download failure of MCU firmware.
<IOT Start Image Marking Timeout>
"Start Image Making" has not been issued within the
time allowed.
<MCU-ESS Communication Fail>
Communication fail between MCU and ESS.
2-16
FIP
Replace the
PWB ASSY
FAX
(PL18.1.10)
Replace the
PWBA ESS.
(REP18.1)
Install the cor-
rect Driver
Software
Replace the
PWB ASSY
FAX
(PL18.1.10)
Replace the
PWBA ESS.
(REP18.1)
Replace the IIT
ASSY
(REP 21.1)
Replace the IIT
ASSY
(REP 21.1)
Update to the
latest F/W
If the problem
cannot be
solved, replace
the PWBA
MCU (REP
18.2)
Update to the
latest F/W
If the problem
cannot be
solved, replace
the PWBA
MCU (REP
18.2)
Update to the
latest F/W
If the problem
cannot be
solved, replace
the PWBA ESS
(REP 18.1)
FIP1.7