Fuji Xerox DocuPrint M355df Service Manual page 144

Step
Checking after resetting the Transfer Unit.
9 Reseat the Transfer Unit.
Is the image printed correctly?
Checking the Transfer Unit for connection.
10 Remove the Transfer Unit.
Are the Plate Spring BTR on HVPS dirty or deformed?
Checking after resetting the Transfer Unit.
11 Reseat the Transfer Unit.
Is the image printed correctly?
Execute the Clean Developer.
(Refer to [Clean Developer] in [Maintenance] of [Admin
12
Menu].)
Is the image printed correctly?
Checking the Drum Cartridge for connection.
Remove the Drum Cartridge.
13
Are the Spring BCR and Spring DB on HVPS dirty or
deformed?
Checking after replacing the Drum Cartridge.
14 Replace the Drum Cartridge.
Is the image printed correctly?
Chapter 3 Image Quality Troubleshooting
Check and Action
3-15
3.2 Image Quality Troubleshooting
Yes
End of work.
Clean up the
Plate Spring BTR
or Replace the
HVPS (REP
18.3), then go to
step 11.
End of work.
End of work.
Clean up the
Spring BCR and
Spring DB or
Replace the
HVPS (REP
18.3), then go to
step 14.
End of work.
No
Go to step 10.
Go to step 11.
Go to step 12.
Go to step 13.
Go to step 14.
Start the oper-
ating after the
FUSING UNIT
has cooled
down.
Replace the
FUSING UNIT.
After replace-
ment, be sure to
clear the life
counter value.