Table of Contents
Advertisement
Product Configuration
Digital Front End (DFE), RIP
Bypass Tray
A4 High Capacity Feeder (A4 HCF)
A4 High Capacity Feeder (A3 OHCF)
single tray
Oversized High Capacity Feeder (A3
OHCF) 2 tray
Color C60 / C70
Interface Module (IFM)
Offset Catch Tray (OCT)
Standard Catch Tray
Finisher C3
Finisher C3 with Booklet Maker
Finisher C3 folder unit
Finisher D4 w/without booklet maker
C/Z Folding unit (D4 Folder Unit)
2/3/4 Hole Punch unit for Finisher C3
3 Hole Punch for Finisher D4
Square fold Trimmer
GBC AdvancedPunch
Space Requirements (Minimum Service Clearance)
These specifications are based on Occupational Health and Safety (OH&S) standards and allow for the safe and effective
operation and servicing of the device, including space for:
•
Moveable components, such as draws and doors
•
A technician to safely access the device
These space requirements (site width & site depth) are the minimum requirement and compliance with these standards is
mandatory for the safety of staff members. Site width and site depth changes with each configuration. Refer to the tables
below for actual site requirements for each configuration.
Site Diagram
Rear Service Clearance
(Non Movable*
Left Service
Clearance
330mm
Standard (✓)
Item
or Option (O)
2
) 610mm
Rear Service Clearance
(Movable*
Machine IOT + chosen options
Front Service Clearance
1070 mm
Site Width
*1
There is a choice of Colour Print Server available for the
Color C60/C70 Printer and includes Integrated Fiery
Colour Server Ex-i, EX Print Server and Integrated
O
FreeFlow Print Server.
The Color C60 / C70 is not sold as a Copier only model
If an OHCF is purchased, the Bypass tray is relocated to
✓
its new position on these units.
O
Cannot work in tandem with another HCF or OHCF
O
Cannot work in tandem with another HCF or OHCF
O
Cannot work in tandem with another HCF or OHCF
✓
Image Output Terminal (IOT) / Print Engine
O
Only required with a Finisher D4
O
Cannot work in tandem with another Finisher Option
O
Cannot work in tandem with another Finisher Option
O
Cannot work in tandem with another Finisher Option
O
Cannot work in tandem with another Finisher Option
O
Option for Finisher C3 only
Cannot work in tandem with another Finisher Option
O
and requires an IFM
O
Option for Finisher D4 only
O
Options for Finisher C3 only
O
Option for Finisher D4 only
O
Option for Finisher D4 with Booklet Maker only
O
Requires an IFM and either HCS or Finisher D4
2
) 250mm
Right Service
Clearance
610mm
Comments
Site
*1
Depth
4
Advertisement
Table of Contents
