Fip2.14 Motor-Assy Option (Pl10.1.19) (Option) - Fuji Xerox DocuPrint M355df Service Manual

FIP2.14 MOTOR-ASSY OPTION (PL10.1.19) (Option)
Step
Parts considered to be the cause
GEAR-OPT IDLER 250 (PL10.1.9)
GEAR-OPT FEEDER 250 (PL10.1.10)
MOTOR-ASSY OPTION (PL10.1.19)
HARNESS ASSY TRAY MOT (PL10.1.11)
PWBA ASSY OPT TRAY (PL10.1.5)
Check for foreign substances in the MOTOR-ASSY
OPTION Drive Section
1
Are there any foreign substances in the MOTOR-ASSY
OPTION Drive Section?
Check the shape of the GEAR-OPT IDLER 250 and the
GEAR-OPT FEEDER 250
2
Is the GEAR-OPT IDLER 250 or the GEAR-OPT FEEDER
250 damaged?
Check connector connection
Check the connection between the MOTOR-ASSY
3 OPTION and the PWBA ASSY OPT TRAY.
Is the HARNESS ASSY TRAY MOT (P/J4221-P/J422)
connected securely?
Check after replacing the MOTOR-ASSY OPTION
4 Replace the MOTOR-ASSY OPTION. (REP 10.7)
Does an error occur?
Check after replacing the HARNESS ASSY TRAY MOT
5 Replace the HARNESS ASSY TRAY MOT.
Does an error occur?
Check and Action
2-87
Chapter 2 Troubleshooting
2.3 Error Code FIP
Yes
Remove the
foreign sub-
stances
Replace the
GEAR-OPT
IDLER 250
and the
GEAR-OPT
FEEDER
250
Go to Step 4.
Go to Step 5.
Replace the
PWBA ASSY
OPT TRAY
(REP 10.3)
No
Go to Step 2.
Go to Step 3.
Securely
connect the
HARNESS
ASSY TRAY
MOT
(P/J4221-P/
J422)
End of work.
End of work.