Preface; Caution For Use Of Spare Parts Illustration; Precautions - Fuji Xerox DocuPrint M355df Service Manual

5.1 Preface

5.1.1 Caution for use of spare parts illustration

- Available spare parts are shown in the illustration by name.
- [Ref PL X.Y.Z] shown below the part name denotes the item is "Z" in the plate "PL X.Y" of the
engineering part list.
- For the detailed composition of the KIT parts, check with the engineering part list.

5.1.2 PRECAUTIONS

- The figures indicating the illustrations are the item No. in the list and present correspondence
between the illustrations and parts.
- The notation of PL "X.Y.Z" is composed of the plate (PL), item "X.Y", and parts "Z".
- The alphabet characters in the illustrations represent screws and clips as follows:
"S": screw, "E": E-ring, "KL": KL clip, "C": C-ring, and "N": nut
- " " mark in the illustrations are attached to items indicating assembly parts in the illustrations.
- Encircled alphabetical figures in the illustrations indicate interrupted leader lines. Same
characters in the illustrations represent lines to be connected.
- The mark "(with 2-5)" attached to assembly parts on the illustrations and lists represents that the
items "2, 3, 4, and 5" of that plate are contained and the mark "(with 2-5, PL6.1.1) represent that
the item "2, 3, 4, and 5" of that plate and the item "1" of the plate "6.1" are contained.
- The mark "[Ref PLX.Y.Z]" attached to parts in the illustrations and lists resents that the parts is
the same as the parts of the item "Z" of the plate "X.Y".
- The mark "" attached to parts in the list represents "Note" or "Reference" about that parts is
contained in the same page.
Safety Critical Component (SCC)
Control of the safety of components that are designated Safety Critical Components shall conform to
Fuji Xerox Co. Ltd-stipulated rules and regulations on Safety Critical Components.
As to replacement of any component designated SCC, the complete component unit must be replaced.
It must never be disassembled or no individual internal parts of it must be replaced.
Installation of any part other than the ones designated by Fuji Xerox Co. Ltd. shall be strictly prohibited
because it cannot be guaranteed in quality and safety.
Important Information Stored Component (ISC)
Important Information Stored Components store customers' important information they have entered
after machine installation. When replacing Important Information Stored Components, you must
replace and discard them, following the procedure described in Chapter 4 Adjustments. Take care
never to let customer information leak out.
5 – 1
Chapter 5 Parts List