System Data Setting Parameter - Fuji Xerox DocuPrint M355df Service Manual

6.14 System Data Setting Parameter

You can set the system data related to fax and scanner.
Procedure
1 Enter the CE mode. (See "6.4.2 How to Enter the CE Mode".)
2 Use the [ ] button to select [Fax/Scanner Diag], and then press the [OK] button.
3 Use the [ ] button to select [Parameter], and then press the [OK] button.
Fax/Scanner Diag
Parameter...
4 Change the Chain Link No., and then press the [OK] button.
• Use the [ ] or [ ] button to move the cursor to left or right.
• Use the [ ] or [ ] button to change the value of the digit where the cursor is placed.
• Pressing the [OK] displays the setting value for the Chain Link No. you have specified.
5 Change the setting, and then press the [OK] button.
• H is displayed when the value is set.
6 Use the [
7 Exit the CE mode. (See "6.4.4 How to Exit the CE Mode".)
Parameter
Chain Link: 840-001
Value (Hex): 81
Parameter
Chain Link: 840-001
Value (Hex):
(Back)] or [ (Stop)] button to return to the [Fax Scanner Diag] screen.
Fax/Scanner Diag
Parameter...
6.14 System Data Setting Parameter
Parameter
Chain Link: 000-000
Value (Hex):
Cursor
H
81
6-83
Chapter 6 General
Cursor