Fuji Xerox DocuPrint M355df Service Manual page 166

Step
Check the paper humidity conditioning effect.
Load the unopened (or sealed and stored under humidity con-
10
trol) and recommended paper, and then perform a test print.
Is the image printed correctly?
Checking the side guides of the Paper Cassette.
11 Reset the side guide.
Is the image printed correctly?
Checking after resetting the Transfer Unit.
12 Reseat the Transfer Unit.
Is the image printed correctly?
Checking after resetting the FUSING UNIT.
Reseat the FUSING UNIT.
Is the image printed correctly?
13
Start the operation after the FUSING UNIT has cooled
down.
Checking after replacing the FUSING UNIT.
Replace the FUSING UNIT.
Is the image printed correctly?
Start the operation after the FUSING UNIT has cooled
14
down.
NOTE
After replacement, be sure to clear the life counter value.
Chapter 3 Image Quality Troubleshooting
Check and Action
3-37
3.2 Image Quality Troubleshooting
Yes
End of work.
End of work.
End of work.
End of work.
End of work.
No
Go to step 11.
Go to step 12.
Go to step 13.
Go to step 14.
Replace the
printer.