8
FRU Disassembly/Assembly
Paper feeder
Paper tray sensor board
8-6
Phaser 550 Color Printer
1.
Turn off the printer.
2.
Open the left side door to access the paper feeder. Slide out the paper
feeder.
3.
With a screwdriver, back out the slide rail stop screws. There is one
screw at the end of each slide rail.
4.
Slide the paper feeder off the rails.
1.
Remove the paper feeder as explained in the previous procedure.
2.
Remove the paper tray.
3.
Disconnect the wiring harness leading to the paper tray sensor board.