Tektronix Phaser 550 Service Manual page 40

2
Installing the Printer and Drivers
2-4 Phaser 550 Color Printer
Driver software must be installed on the host computer to use the printer to its
fullest potential. A host computer must meet the following conditions:
Mac
Mac II, Performa, Centris or Quadra, PowerMac or PowerBook.
System 6.0.7 or later
4 Mbytes RAM
PC
IBM AT, PS/2 or compatible, with a 386 or later CPU, a 5.25- or
3.5-inch floppy drive, and a hard disk drive, 2 Mbytes RAM
DOS system
DOS 3.1 or later
An application that supports color PostScript or HP-GL
Windows systems
Windows 3.1
2 Mbytes of hard disk space
Workstation
UNIX workstations: The X Window System,
SUN workstations: Solaris 1.1 (BSD), Solaris 2.x (Sys V, optional LPD
support required)
DEC: Ultrix, VMS, OpenVMS
HP: HP-UX
SGI: IRIX
IBM RS6000: AIX (optional LPD support required)
750 kbyte hard disk space for files
Based on the results of the pre-install interview with the customer, you may
wish to access the Tektronix Highly Automated Library (HAL) at 1 800 835-6100
or EuroHAL for articles that may help with installing the printer into a
customer's network. You can call HAL 24 hours a day, 7 days a week. The
articles can be faxed to you in just minutes. HAL may also have articles that
may be of interest to your customer, such as printing from a specific application.
(This is a good way of introducing the HAL system to the customer.)