Power supply fuse
Caution
To avoid damaging the printer, only replace the power supply fuse
with a fuse of the same type and rating.
1.
Remove the power supply as explained in the previous procedure,
"Power supply" on page 8-11.
2.
Remove the power supply's cover. It is secured in place with
10 screws (one of the screws secures the power supply fan).
3.
Locate the fuse near the bottom of the power supply by the power
cord receptacle.
Fuse
Figure 8-8 Replacing the power supply fuse
FRU Disassembly/Assembly
9013-34
Service Manual
8
8-13