Tektronix Phaser 550 Service Manual page 212

9
Checks and Adjustments
Table 9-2 Status code meanings (cont'd.)
Status Front Binary
State Panel
Hex 7 . . .
Status - 47
Density
Control
Process
Status
Status - 47 02 0000 0010
Example
9-30 Phaser 550 Color Printer
Meaning/Description
0
This status shows the details of the density control processes. This also relates to the
detailed status of Status - 0 Bit 2and Status - 4 Bit 5.
0. Odd parity.
1. 1 = The engine is in toner density sensor calibration mode.
0 = The engine is not in toner density sensor calibration mode.
2. 1 = The engine is in maximum density control mode.
0 = The engine is not in maximum density control mode.
3. 1 = The engine is in gamma calibration mode.
0 = The engine is not in gama calibration mode.
4. Not used.
0 = Always set to 0.
5. Not used.
0 = Always set to 0.
6. Not used.
0 = Always set to 0.
7. 1 = A communication error has occurred.
0 = There is no communication error.
The print engine is currently recalibrating its toner density sensor.
There is no communication error.