Tektronix Phaser 550 Service Manual page 208

9
Checks and Adjustments
Table 9-2 Status code meanings (cont'd.)
Status Front Binary
State Panel
Hex 7 . . .
Status - 35
Empty/
Absent
Media
Warning
Error
Status
Status - 35 01 0000 0001
Example
Status - 40
Print
Resolution
Error
Status
Status - 40 02 0000 0010
Example
9-26 Phaser 550 Color Printer
Meaning/Description
0
This status shows the present toner cartridge color that is in process. This status is not
linked to any other status.
0. Odd parity.
1. Not used.
0 = Always set to 0.
2. 1 = The engine is developing the cyan image layer.
0 = The engine is not developing the cyan image layer.
3. 1 = The engine is developing the magenta image layer.
0 = The engine is not developing the magenta image layer.
4. 1 = The engine is developing the yellow image layer.
0 = The engine is not developing the yellow image layer.
5. 1 = The engine is developing the black image layer.
0 = The engine is not developing the black image layer.
6. Not used.
0 = Always set to 0.
7. 1 = A communication error has occurred.
0 = There is no communication error.
The image is not being made/developed by the cyan cartridge.
The image is not being made/developed by the magenta cartridge.
The image is not being made/developed by the yellow cartridge.
The image is not being made/developed by the black cartridge.
There is no communication error.
This status shows the engine imaging resolution information. This status is not linked to
any other status.
0. Odd parity.
1. 1 = The resolution is set to 2400 x 600 dpi.
0 = The resolution is not set to 2400 x 600 dpi.
2. 1 = The resolution is set to 2400 x 1200 dpi.
0 = The resolution is not set to 2400 x 1200 dpi.
3. Not used.
0 = Always set to 0.
4. Not used.
0 = Always set to 0.
5. Not used.
0 = Always set to 0.
6. 1 = The resolution mode command has been received and will be picked at the next
print.
0 = The resolution mode command has not been received.
7. 1 = A communication error has occurred.
0 = There is no communication error.
The resolution is 1200 dots per inch. The power-up default is 1200 dpi.
The 600 dots per inch mode command has not been received.
The 1200 dots per inch mode command has not been received.
There is no communication error.