Installing The Printer And Drivers - Tektronix Phaser 550 Service Manual

Chapter
2
Installing the Printer and
Drivers
This chapter discusses installing the printer and its drivers as a part of the S0
printer installation option. Tektronix Service Option S0 consists of three main
functions detailed in this and the next two chapters of this manual:
Chapter 2 "Installing the Printer and Drivers." The first portion of
installation instructions, this chapter, consists of five basic processes:
Pre-installation interview. This is a phone interview to verify that the
customer is ready for the printer. The interview verifies that the
customer has a suitable place for the printer with the proper
environment. The call also verifies that any assistance, such as network
system administration, will be available for the scheduled installation
and that all necessary cables will be available.
Unpacking. This is the procedure for taking the printer out of its
shipping box.
Testing. This checks that the printer works properly prior to connecting
it to a host computer.
Cabling and configuring. This discusses setting up the printer for
communicating to the appropriate host computers.
Loading drivers. This covers installing software on the host computers
and configuring the host applications to drive the printer.
Following these steps, proceed to Chapter 3 and then Chapter 4.
Chapter 3 "Verifying the Printer and Host Connections" explains how
to verify that the printer, the host driver and the connection between
them functions correctly.
Chapter 4 "Key Operator Training" gives a procedure for training the
customer to use and care for the printer.
Service Manual 2-1