Laser scanner
1.
Remove the top cover as explained in the earlier topic, "Top cover" on
page 8-2.
2.
Disconnect the four wiring harnesses connected to the laser scanner.
3.
Remove the three screws securing the laser scanner in place. Lift and
remove the laser scanner.
Note
Cover the laser window slot leading to the imaging unit to protect the
photoconductive belt from room light.
Figure 8-5 Removing the laser scanner
FRU Disassembly/Assembly
Remove three
screws
Laser scanner
Disconnect wiring
harnesses
9322-87
Service Manual
8
8-9