Tektronix Phaser 550 Service Manual page 211

Table 9-2 Status code meanings (cont'd.)
Status Front Binary
State Panel
Hex 7 . . .
Status - 45
Eject
Mode
Status
Status - 45 02 0000 0010
Example
Status - 46
Maximum
Density
Warning
Status
Status - 46 01 0000 0001
Example
Meaning/Description
0
This status shows details of the paper exit mode for the next print. This status is not
linked to any other status.
0. Odd parity.
1. 1 = Current exit mode is face up. Manually feeding transparencies always exit face up
but do not set this bit.
0 = The current exit mode is face down.
2. 1 = The face down mode command has been received and will be reflected by the next
print.
0 = The face down command has not been received.
3. 1 = The face up mode command has been received and will be reflected by the next
print.
0 = The face up command has not been received.
4. Not used.
0 = Always set to 0.
5. Not used.
0 = Always set to 0.
6. Not used.
0 = Always set to 0.
7. 1 = A communication error has occurred.
0 = There is no communication error.
The current paper exit mode is face-up.
The face-down mode command has not been received.
The face-up mode command has not been received.
There is no communication error.
This status shows the details of the maximum density warning. This also relates to the
detailed status of Status - 0 Bit 2 and Status - 4 Bit 5.
0. Odd parity.
1. 1 = Cyan is at maximum density
0 = Cyan is not at maximum density.
2. 1 = Magenta is at maximum density
0 = Magenta is not at maximum density.
3. 1 = Yellow is at maximum density
0 = Yellow is not at maximum density.
4. 1 = Black is at maximum density
0 = Black is not at maximum density.
5. Not used.
0 = Always set to 0.
6. Not used.
0 = Always set to 0.
7. 1 = A communication error has occurred.
0 = There is no communication error.
Cyan is not at maximum density.
Magenta is not at maximum density.
Yellow is not at maximum density.
Black is not at maximum density.
There is no communication error.
Checks and Adjustments
Service Manual 9-29
9