Tektronix Phaser 550 Service Manual page 54

2
Installing the Printer and Drivers
Table 2-1 Configuration page settings for the Phaser 550 (cont'd.)
Parameter Description
TCP/IP port Indicates the type of interpreter in use at
interpreter the port.
RARP/BOOTP Used for setting the printer's IP address
from a boot server.
IP Address The Internet Protocol address. If null,
the address will be set at run time via
RARP or BOOTP.
Network Mask Indicates which fields of the IP Address
designate the network portion and which
designate the node portion. If null, the
mask will be determined from the
printer's IP address or the BOOTP or
ICMP Netmask Reply.
Broadcast The IP Address used to broadcast
Address messages on the local network. If null,
the value will be determined from the IP
Address and Network Mask at runtime.
Gateway A list of addresses of the gateways to
Address(es) other networks.
Ethernet Frame Data packet encapsulation type for
Type ARP/RARP requests and IP datagrams.
LPR port Indicates the type of interpreter in use at
interpreter the BSD system configured port.
LPR Host List of TCP/IP network addresses for
access list host to access to printer.
LPR Receive Buffer size used by the printer.
Window Size
AppSocket Indicates the type of interpreter in use at
port the System V configured port.
interpreter
AppSocket Port number for bi-directional
Data Port transmission of printer language jobs.
Number
AppSocket Host List of TCP/IP network addresses for
access list host to access to printer.
AppSocket Port number for sending status
Status Port information back to the host computer.
Number
2-18 Phaser 550 Color Printer
Saved Default
in
NVRAM
yes
yes False
yes Not Set
yes Default
yes Default
yes None
yes DIX
yes
yes
yes 0
yes Auto Select
yes 9100
yes
yes 9101
Limits or alternate choices
Not authorized, Disabled
True
String of 15 or fewer
characters of the format
N.N.N.N followed by the word
"Dynamic" if IP Address
Dynamic parameter is set to
true.
String of 15 or fewer
characters of the format
N.N.N.N
String of 15 or fewer
characters of the format
N.N.N.N
String of 15 or fewer
characters of the format
N.N.N.N
Adaptive, 802.2-SNAP. May
be followed by the word
"Dynamic"
Not Authorized, Disabled
<null string>
Unrestricted, only first 16 on
list print on the configuration
page
0 to 512. 0 means the buffer
size will be based on the total
memory in the printer
Not Authorized, Disabled,
<interpreter>
1024 through 65535
Unrestricted, only first 16 on
list print on the page
1024 through 65535