Right side covers (front, rear and lower)
Toner level
sensor board
Figure 8-2 Removing cabinet covers
Remove the front and rear right side covers before removing the right side lower
cover.
1.
Remove the paper tray.
2.
Remove the two screws securing each of the three right side cover in
place. Remove the covers. Note that the lower side cover clips
underneath the printer frame.
Upper and
lower front
cover
Front door
FRU Disassembly/Assembly
Right side
covers
Front
Bottom
front
cover
Service Manual
8
Rear
Lower
9013-28
8-5