Tektronix Phaser 550 Service Manual page 50

2
Installing the Printer and Drivers
The configuration page
Table 2-1 Configuration page settings for the Phaser 550
Parameter Description
Printer type The name of the product.
Printer name The current name of the printer as seen
on a network
Pages printed Total number of print jobs processed
through the image processor.
Startup page Indicates if the printer prints a startup
enabled page upon power-up.
Ethernet A unique number for each
address Ethernet-capable printer.
2-14 Phaser 550 Color Printer
To provide further diagnostic information, the printer is able to print a
configuration page. The configuration page lists the values the printer stores in
its NVRAM. These values can be informative when troubleshooting the printer,
particularly networked operations. Refer to the Chapter 6 topic Printing the
configuration page" on page 9-4 for details on printing the configuration page.
A downloadable PostScript utility, found on the Drivers and Utilities diskette,
also allows you to print the configuration page.
The configuration page gives you the following information:
General information about the printer, such as page count, the
programmed name, Ethernet address, the TCP/IP authorization code
(if loaded), timeouts, number of fonts, and total memory
Color settings such as Finepoint and Vivid Color.
Serial port settings
Parallel port settings
LocalTalk port settings
EtherTalk settings
Token Ring settings
TCP/IP settings
Novell NetWare settings
Saved Default
in
NVRAM
yes Phaser 550
yes <printer type>
same as the
name of the
product
yes 0
yes No
yes Hardware-
dependent.
Legal values
have the form
xx:xx:xx:xx:xx:xx
Limits or alternate choices
Any name defined by the
customer up to 31 characters
in length
Yes