Tektronix Phaser 550 Service Manual page 198

9
Checks and Adjustments
Table 9-2 Status code meanings (cont'd.)
Status Front Binary
State Panel
Hex 7 . . .
Status - 7
Media
Feed
Source
Status
Status - 7 40 0100 0000
Example
9-16 Phaser 550 Color Printer
Meaning/Description
0
This status shows the paper pass mode and the paper source for the next print. The
status is updated when the next sheet of paper is picked. This status is not linked to any
other status states.
0. Odd parity.
1. 1= Use manual feed source in response to manual feed command or media in the
manual feed tray.
0 = Use tray as media source.
2. 1 = Transparency tray is selected or transparency film is in the manual feed tray.
0 = Use paper source.
3. 1 = Not used.
0 = Always set to 0.
4. 1 = Use optional tray 2
0 = Other mode.
5. 1 = Use optional tray 1
0 = Other mode.
6. 1 = Use standard tray
0 = Other mode.
7. 1 = A communication error has occurred.
0 = There is no communication error.
The selected tray is set as a paper source mode.
The printer is in paper mode.
There is no optional tray 2.
There is no optional tray 1.
The printer is using the standard tray mode.
There is no communication error.