Tektronix Phaser 550 Service Manual page 52

2
Installing the Printer and Drivers
Table 2-1 Configuration page settings for the Phaser 550 (cont'd.)
Parameter Description
Firmware Firmware version of the installed
version Ethernet card
LocalTalk port Indicates the type of interpreter in use at
interpreter the port
LocalTalk Indicates the type of printer installed at
Printer Type the port
LocalTalk Node Indicates the LocalTalk network node
number of the printer
Parallel Port Indicates the type of interpreters in use
interpreter at the port
Parallel Port Indicates the type of data encoding the
Encoding parallel port is inspecting
Parallel Port The device used for standard output and
back channel standard error.
Handshaking Setting whether unidirectional or
bidirectional communication is used.
Serial Port Indicates the type of interpreters in use
interpreter at the port.
Serial port Data byte encoding for communication.
encoding
Serial port Baud rate.
speed
Serial port Hardware or software flagging.
flagging
Serial port Parity check encoding method.
check parity
Serial port data Bits used to encode a data byte.
bits
Serial port stop Number of stop bits.
bits
EtherTalk Port Indicates the type of interpreter in use at
interpreter the port.
EtherTalk Indicates the type of printer installed at
Printer type the port.
EtherTalk Zone Name assigned by network administrator
for the zone the printer is assigned to.
EtherTalk The EtherTalk protocol address
Network assigned at boot time for routing.
EtherTalk Node Indicates the EtherTalk address of a
printer on the network.
2-16 Phaser 550 Color Printer
Saved Default
in
NVRAM
no
yes PostScript Level 2 Not installed, Disabled,
yes LaserWriter
no 0
yes PostScript Level 2 Not installed, Disabled,
yes Binary
yes None
yes PostScript Level 2 Not installed, Disabled,
yes ASCII
yes 9600
yes XonXoff
yes None
yes 8
yes 1
yes PostScript Level 2 Not installed, Disabled,
LaserWriter
yes *
yes 0
yes 0
Limits or alternate choices
<interpreter>
Any string 32 characters in
length or less
Any integer 1 through 254
<interpreter>
ASCII, Raw, TBCP
Serial B, Serial C, ... , or
Parallel, Parallel B,
Parallel C, ...
<interpreter>
Binary, Raw, TBCP
38400 (product dependant),
19200, 9600, 4800, 2400
DTR, DTR low, Etx Ack,
Robust Xon Xoff, Xon Xoff2
Space, Even, Odd, Mark
7
2
<interpreter>
Any string, 32 character or
less
Any string, 32 characters or
less
Integer 1 through 65534
Integer 1 through 253