8
FRU Disassembly/Assembly
The printer cabinet
Upper rear cover
Lower rear cover
Top cover
Left door (for paper feeder access)
Left side cover
8-2
Phaser 550 Color Printer
1.
Remove the six screws securing the upper rear cover in place.
1.
Remove the four screws securing the lower rear cover in place.
1.
Remove the upper rear cover first.
2.
Remove the three screws securing the rear of the top cover in place.
3.
The front of the top cover is held by metal tabs. Tilt the cover up from
the rear, slide it back slightly and remove.
1.
Open the left door.
2.
Unhook the retaining strap from the door.
3.
Unpin the two hinge spring arms (black plastic). Each is located at
the ends of the door.
4.
Unpin the door from the engine frame. Unpin the rear of the door
first.
1.
Lower the manual feed tray.
2.
Remove the four screws securing the left side cover to the print
engine. Tilt forward and remove the cover.
Manual feed tray
1.
Tilt the tray up slightly and squeeze the tray's retaining pins inward to
free it from the print engine frame.