Tektronix Phaser 550 Service Manual page 53

Table 2-1 Configuration page settings for the Phaser 550 (cont'd.)
Parameter Description
TokenTalk Indicates the type of interpreter in use at
interpreter the port.
Token Ring A unique number for each printer. based
Address on the printer's ID.
Speed Data transmission speed the network
card is set to. Set by a jumper on the
card. (Jumper not installed equals
16 Mbps, jumper installed equals
4 Mbps).
Bridging Token Ring source routing.
All Routes The printer sends response packets
Broadcast back to the host indicating all possible
routes to the printer.
Connection Indicated if the printer is connected or
State inserted into the token ring.
Early Token The printer releases the token at the end
Release of the last byte transmitted (not
applicable a 4 Mbps).
Firmware Firmware version of the printer's Token
Version Ring network card.
Printer type Indicates the type of printer installed at
the port.
Zone Name assigned by network
administrator for the zone the printer is
assigned to.
Network Node Indicates the Token Ring address of the
printer on the network.
NetWare port Indicates the type of interpreters in use
interpreter at the port.
Print Server Name of printer server.
Name
Configuration Name of the configuring file server.
file server
Login Password Indicates whether or not a network
password has been set.
Queue Scan Rate at which printer will scan queue for
rate print jobs.
Network Printer address and node on the
Address Ethernet network.
Ethernet Frame How IPX packets are transmitted over
Type the network.
Installing the Printer and Drivers
Saved Default
in
NVRAM
yes PostScript
Level 2
yes None
yes 16 Mbps
yes Adaptive (printer
determines route
based on data)
yes False
yes Inserted
yes On
yes
LaserWriter
yes *
yes 0
yes Auto Select
yes TEK01B009,
hardware
dependant
yes null string
yes Not set
yes 15 seconds
yes null string
yes Adaptive
Limits or alternate choices
Not installed, Disabled,
<interpreter>
Any valid token ring address
4 Mbps
Transparent (no source
routing), SourceRoute (use
source routing)
True
No Cable, Cable connected,
Removed, Duplicated Address
Off
X.XX
Any string, 32 character or
less
Any string, 32 characters or
less
Integer assigned by network
Disabled, <interpreter>
user-defined
user-defined
Set, Not set
An integer 1 through 300 in
seconds
An 8 digit hex number
00000001 through FFFFFFFE
802.3-X, DIX, 802.3-2,
802.3-2-SNAP
Service Manual
2
2-17