Printer Cabinet; Roll Cover - Tektronix Phaser 600 Service Manual

8
Field Replaceable Unit Disassembly/Assembly

Printer cabinet

Roll cover

8-2 Phaser 600 Color Printer
Tools required
4 mm hex wrench
1.
Turn off the printer. Leave the power cord plugged in to provide a
discharge path for static electricity.
2. Open the roll cover and remove the media roll.
3. With a 4 mm hex wrench, remove the two screws and their standoff
posts, one at each end of the cover, securing the cover to the printer
frame. Note that the right standoff features a shoulder to correctly
align the roll cover to the printer frame.
Standoff
Roll cover
Figure 8-1 Removing the roll cover
Reverse these steps to reinstall the roll cover. Support the weight of the cover
while you thread the screws into the printer frame.
#1 POSIDRIV® screwdriver
Screw
Screw
Standoff
with shoulder
Standoff
9482-24