Part 1 Setting Up
High-torque Spindle (Optional) Set
Make sure the following items are included with the high-torque spindle (ZS-650T/ZS-500T).
Spindle unit
Installing the High-torque Spindle (ZS-650T/ZS-500T)
Fasten the spindle, tool, and
material securely in place.
Otherwise they may come loose during
cutting, resulting in injury.
1
Align the pin on the back of the spindle unit with the pin-
hole on the slider, and support it with your hand.
26
Collet
Screws: 4
Pin hole
Wrenches
(24 mm (15/16 in.),
13 mm (1/2 in.))
Hexagonal screw driver
Slider