Step 4 : Set The Material - Roland monoFab SRM-20 User Manual

〇〇〇●〇〇〇〇〇
Creating a MODELA Player 4 File

STEP 4 : Set the Material

Select the material.
Choose a workpiece material from the pull-down list .
Select the quality of the material . Set the type of prepared material .
""Material Types" (p . 20)
MEMO
Set up the quality of the material before process creation .
Because changing the composition also produces changes in the cutting
tool and the cutting parameters, changing the composition after you have
created the processes is not recommended .
57