Troubleshooting; Error And Warning Messages; Most Common Warning Messages; E56: Gas Leak - Teledyne CP Series User Manual

User Manual
CP Series
Version 3.1 – June 2020

6. TROUBLESHOOTING

6.1 E
RROR AND WARNING MESSAGES
The CP SERIES generator in combination with the PowerBox is an intelligent system which offers a high
level of safety and operation comfort. The high amount of feedback from the equipment is new in the
industry and may lead to confusion or the impression that the equipment is defect. In most of the cases
however, you will find that the equipment is not defect, but it halted due to out of bound environmental
variables or a mistake of the operator. The following chapter will explain in more detail some of the message
you may encounter.
Messages displayed on the PowerBox can be divided in 2 main groups: warning messages and error
messages.
Warning messages are there to inform the user of a potentially dangerous situation or incorrect use of the
equipment. These messages are warnings only. It will be possible to use the equipment after
acknowledging the warning message.
Error messages indicate a failure situation that prevents the equipment from operating. This failure
situation must be resolved before a next shot can be made.
6.2 M
OST COMMON WARNING MESSAGES
6.2.1 E56: G
AS LEAK
The CP SERIES constantly makes sure the pressure is high enough according to SF6 temperature. If it is
too low a warning message will be displayed indicating that the gas pressure is getting low. Please schedule
maintenance for the CP SERIES generator to identify any gas leaks and refill the generator with SF6.
6.2.2 E162: C
The carousel position detection has been disabled in the software. This may be wanted in case there is a
defect in the carousel position detection system but the PowerBox will remind you that the detection system
was deactivated every time the PowerBox is powered ON.
Please schedule maintenance of the CP SERIES generator as soon as possible to repair the carousel
position detection system for your own safety and comfort.
6.2.3 E163: C
When attempting to make an exposure with the carousel in shutter position a warning message 'Carousel
shutter' will be displayed on the main display.
Shooting with the carousel in shutter position will not damage the equipment but X-ray emission is blocked
by the shutter. The film will thus not get exposure.
. D .
AR ESACTIV
.
AR SHUTTER
50